Airing Programme/ Humidity Rectification - Sentiotec Wave.com4 Instructions D'installation Et D'utilisation

Instructions for assembly and use
The colour relay module can be switched independently of the cabin light using its own
operating unit!
If a connection exists between the optional LED board WC4-CL-R/L and the WC4-B-L
using a 4 or 6 pole data cable (RJ10 4/4 or RJ12 6/6), the LED colour light is switched
when the cabin light is deactivated.
3.12.7

Airing programme/ humidity rectification

Change to the
Simultaneously pressing the
(the symbol flashes).
You can now set the rectification value with the
You have the option of rectifying the displayed temperature value. This is possible
within a range of ±9° C.
A temperature rectification value of "0" is set as standard.
Relay with the
airing with heating and ventilator (0 to 2 hours possible).
Relay with the
without heating, but with ventilator (0 to 30 minutes possible).
Relay with the
temperature in a range of between 70 ° C and 90 ° C.
Confirm your settings with the
WE DO IT FIRST.
symbol (humidity symbol) with the
keys for at least 3 seconds will take you to the settings menu
key. The
key. The
key. The symbol illuminates. You can now set the airing
key.
keys.
symbols illuminate. You can now set the
symbols illuminate. You can now set the airing
key.
32 /228