Switching Off; Programming; Automatic Switch-On - Sentiotec Wave.com4 Instructions D'installation Et D'utilisation

Instructions for assembly and use
Possible humidity values (dependent on sauna temperature) can be found in the graphic below.
Observe the standard curve (see Point 3.4.0 of these operating instructions).
CAUTION!
The water evaporator must be fitted with a safety switch
in the event of water deficiency.

3.11.0 SWITCHING OFF

By pressing the
operating instructions).
Change to the OFF menu point with the
Confirm your selection with the
If you have executed climate operation/humidity operation before switching off the Wave.com4
sauna control unit, the control unit will start the airing programme after the aforementioned action
(see Point 3.12.7 of these operating instructions). Dry now appears on the operating unit (airing
programme is executed). When the airing programme ends (run time: 2x 15 minutes) the
Wave.com4 sauna control unit switches off automatically.
The cabin light and heating device are now deactivated and the
Subsequently disconnect the Wave.com4 sauna control unit from the mains using the
main switch in order to prevent an unwanted heating process from occurring (e.g.
children pressing keys on operating unit).

3.12.0 PROGRAMMING

3.12.1

Automatic switch-on

Activate the main switch which disconnects the Wave.com4 sauna control unit from the mains after
use at all poles. The
WE DO IT FIRST.
key, you reach the operating mode selection menu (see Point 3.4.0 of these
key.
symbol on the operating unit illuminates.
keys.
symbol illuminates.
27 /228