Automatic Switch-Off; Temperature Rectification - Sentiotec Wave.com4 Instructions D'installation Et D'utilisation

Instructions for assembly and use
The automatic switch-on can be programmed by simultaneously pressing (3 secs.) the
keys. Now set a time interval in hours (1 to 24) with the
mode setting menu with the
Here you can select the operating mode which your Wave.com4 sauna control unit
starts in after the programmed time interval has elapsed.
Confirm your selection with the
The automatic function of the Wave.com4 sauna control unit is active when the
symbols illuminate. The operating unit display now shows you the remaining time in hours until the
Wave.com4 sauna control unit starts the operating mode pre-programmed by you.
The automatic switch-on mechanism is deactivated in the event of power failure or
manual switch-on.
3.12.2

Automatic switch-off

Activate the main switch which disconnects the Wave.com4 sauna control unit from the mains at
all poles after use. The
The automatic switch-off can be automatically programmed by simultaneously pressing (3 secs.)
the and keys. Now set a time interval in hours (1 to 24) with the
Confirm your selection with the
3.12.3

Temperature rectification

When only using the components WC4-B-L and WC4-B-F1 for the Finnish sauna, the
Wave.com4 sauna control unit only regulates according to the heater sensor. The
temperature measured above the heater deviates from the temperature on the bench.
The use of components WC4-B-L, WC4-B-F1, WC4-H-PCB and WC4-H-F2 is
recommended for the Finnish sauna for exact temperature regulation!
WE DO IT FIRST.
key.
key.
symbol on the operating unit illuminates.
key.
keys. Change to the operating
and
keys.
and
28 /228