Configuration Of Colour Module/ Led Colour Module - Sentiotec Wave.com4 Instructions D'installation Et D'utilisation

Instructions for assembly and use, only for experts

6.6.0 CONFIGURATION OF COLOUR MODULE/ LED COLOUR MODULE

Figure 34: socket configuration LED colour module
WE DO IT FIRST.
6.6.3 SUPPLY
The upper terminals internally supply the optional colour
extension. These are usually supplied by the humidity module
directly above. Otherwise, Point 6.4.10 of these operating
instructions must be complied with.
6.6.4 LAMP TERMINALS
The lateral terminals connect the colour lamps. The cables are
laid from there to the lamps. A 6-pole cable should be laid. For
individual lamp cables, the neutral wire connection must be
gathered externally. The colours are allocated in accordance
with the lamp module schedule. The "res. 6" connection is not
applicable.
52 /228