Electronic Hour Glass; Dimming The Cabin Light; Setting Humidity (Optional: Wc4-H-Pcb) - Sentiotec Wave.com4 Instructions D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Navigate to Temperature Setting in the menu (see Point 3.6.0 of these operating instructions).
When you are in the Temperature Setting menu, press and hold the
choice with the

3.8.0 ELECTRONIC HOUR GLASS

Change to the
set your desired interval with the
(buzzer is integrated into the power unit), that your desired interval (run time) has elapsed. The
acoustic signal can be switched off (see Point 3.12.5 of these operating instructions).

3.9.0 DIMMING THE CABIN LIGHT

Change to the
brightness with the
Switch the cabin light off by briefly pressing the
Switch the cabin light on again (0% dimming) by pressing and holding the
Dim the cabin light (power) by pressing and holding the

3.10.0 SETTING HUMIDITY (OPTIONAL: WC4-H-PCB)

Change to the
desired humidity with the
After approx. 3 secs. (without pressing the keys again) the control unit automatically reverts to the
previous display (actual temperature).
Humidity operation:
Humidity operation is dependent on sauna temperature. This is why humidity operation works up
to a sauna temperature of 70° C.
Instructions for assembly and use
key. Confirm your selection with the
symbol (time interval, electronic hour glass) with the
keys. The hourglass can notify you via an acoustic signal
symbol (light brightness) with the
keys.
symbol (actual or desired humidity) with the
keys.
WE DO IT FIRST.
keys). Select your
key.
key and set the desired
key.
or
key.
key and
key.
key and set your
26 /228

Publicité

Table des Matières
loading

Table des Matières