Manual Input Of The Average Unit Weight - Adam Equipment Solis SAB Série Mode D'emploi

4. To exit from part counting mode, press the ON/OFF button and the balance will return to the
normal weighing conditions.
11.1.1

Manual input of the average unit weight

This function allows the user to enter, when known, the average unit weight of the part, thus
avoiding the sampling of the parts.
1. Select the part counting program as described in paragraph 10. The following screen will
be shown on the display:
2. Press the MENU button until the following message appears on the display:
3. Then press the PRINT button to confirm.
4. Insert the part's unit weight in grams using the CAL and MENU buttons to increase and
decrease the value, while pressing the O/T button to pass to the next value. To insert a
decimal point, hold down the CAL button for a prolonged time. During the entering phase,
the prolonged pressing of the O/T button allows you to delete the inserted value.
©Adam Equipment Co. Ltd. 2018
38