Calibration Data - Adam Equipment Solis SAB Série Mode D'emploi

WARNING: this procedure must be carried out only using class E2 reference masses.

10.13 CALIBRATION DATA

This function allows the user to display the data relative to the last calibration carried out.
Date
Calibration mode
Correction
1. Select the calibration data parameter as described in paragraph 10.
The data relative to the last calibration carried out will be shown on the display:
2. Press the PRINT button to print the calibration data.
3. Press the ON/OFF button to exit from the screen and return to the balance parameters
menu. It will now be possible to select another parameter or return to weighing mode by
pressing the ON/OFF button.
©Adam Equipment Co. Ltd. 2018
34