Mode With Manual Insertion Of The Reference Weight - Adam Equipment Solis SAB Série Mode D'emploi

11.5.2

Mode with manual insertion of the reference weight.

1. Select the percentage weight function as described in paragraph 10. The following screen
will be shown on the display:
2. Press the MENU button to select manual mode
3. Confirm manual mode by pressing the PRINT button.
4. You can now enter the reference weight value, using the CAL and MENU keys to increase
and decrease the value, while pressing the O/T button to pass to the next value. During the
entry phase, holding down the O/T button allows you to delete the value entered. The value
entered will remain in the memory until the balance is turned off. It is also possible to enter
the value using the optional alphanumeric keypad.
5. After having inserted the desired reference weight value, press the ENTER key.
6. Now load the sample and read the percentage value.
7. Press the ON/OFF button exit from the percentage weighing function.
NOTE: If the reference weight entered is less than 10 displayed digits, the word ERROR
07 will be shown.
©Adam Equipment Co. Ltd. 2018
55