4. Press the PRINT button to confirm.
5. Enter the name of the first component (it can be a series of numbers or letters, max 11
characters) using the MENU or CAL buttons to scroll through the available characters.
6. Then press the PRINT button to confirm and save the value.
7. Now enter the quantity of the component using the MENU or CAL buttons to increase or
decrease the value while pressing the O/T button to pass to the next value and the PRINT
button to pass to the next parameter.
8. Now enter the negative tolerance and press PRINT button to pass next parameter
9. Now enter the positive tolerance.
10. Then press the PRINT button to confirm and save the value.
11. Repeat the operation described from point 5 to point 10 to enter all of the desired
components up to a maximum of 20.
12. After having entered all of the desired components press the ON/OFF button to exit from
the formula saving procedure.
©Adam Equipment Co. Ltd. 2018
48