Input Commands Format - Adam Equipment GBK Série Mode D'emploi

EN
11.1.

INPUT COMMANDS FORMAT

The scale can be controlled with the following commands. Press the [Enter] key of
the PC after each command.
Tares the scale to display the net weight. This is the same as
T<cr><lf>
pressing [Tare].
Sets the zero point for all subsequent weighing. The display shows
Z<cr><lf>
zero.
Prints the results to a PC or printer using the RS-232 interface. It
P<cr><lf>
also adds the value to the accumulation memory if the
accumulation function is not set to automatic.
© Adam Equipment Company 2011 39 3056610542RevD-Aug11