Stability Function - Adam Equipment Solis SAB Série Mode D'emploi

FILTER MENU
Filter 1
Filter 2
Filter 3
3. After selecting the desired filter value, the screen will display the balance parameters menu
again. It will now be possible to select another parameter or return to weighing mode by
pressing the ON/OFF button.
10.6

STABILITY FUNCTION

The stability symbol will appear on the display when the weight is stable within a defined
interval.
1. Select the stability parameter as described in paragraph 10.
The current stability value will be shown on the display:
2. Select the desired stability value. By pressing the MENU or CAL button, you can then scroll
through the various levels upward or downward; finally confirm your choice by selecting the
PRINT button.
STABILITY MENU
Stability 1
Stability 2
Stability 3
©Adam Equipment Co. Ltd. 2018
FILTER LEVEL
Use this filter level in a stable environmental condition
and for use of the balance in filling or dosing mode.
Use this filter level when the environmental conditions
are not stable.
Use this filter level when the environmental conditions
are particularly unstable.
LEVEL OF STABILITY
Use this level of stability when the environmental conditions
are stable
Use this level of stability when the environmental conditions
are less stable
Use this level of stability when the environmental conditions
are unstable
24