Date And Time Settings - Adam Equipment Solis SAB Série Mode D'emploi

10.10 DATE AND TIME SETTINGS

This function allows you to set the date and time, and to modify the date display format.
1. Select the date and time parameter as described in paragraph 10. The current set date and
time will be shown on the display:
2. Select the desired format of the date. Pressing the MENU or CAL button it will be possible
to modify the format dd-mm or mm-dd; then confirm the choice with the PRINT button.
3. Set the desired date and time by using the MENU and CAL buttons to increase and
decrease the number and the PRINT button to pass to the next date.
4. After date and time have been set, press and hold the PRINT button until the beeping stops
and then release the button to save the settings.
5. The screen relative to the balance parameters menu will then be displayed. It will now be
possible to select another parameter or return to weighing mode by pressing the ON/OFF
button.
©Adam Equipment Co. Ltd. 2018
28