Contrast Adjustment - Adam Equipment Solis SAB Série Mode D'emploi

3. After having selected the desired value for stability, the screen will display the balance
parameter menu will be displayed again. It will now be possible to select another parameter
or return to weighing mode by pressing the ON/OFF button.
10.7

CONTRAST ADJUSTMENT

The balance is equipped with an LCD display; the contrast can be adjusted in order to make
the indication as visible as possible from different angles and different light levels.
1. Select the contrast adjustment parameter as described in paragraph 10. The current set
contrast value will be shown on the display:
2. Select the desired contrast value. By pressing the MENU or CAL button, it will be possible
to increase or decrease the value; then confirm the choice with the PRINT button.
3. After selecting the desired contrast level, the screen will display the balance parameters
menu again. It will now be possible to select another parameter or return to weighing mode
by pressing the ON/OFF button.
©Adam Equipment Co. Ltd. 2018
25