Piece Counting Function - Adam Equipment Solis SAB Série Mode D'emploi

11.1

PIECE COUNTING FUNCTION

The piece counting program allows you to carry out a total count of the parts after having
carried out a sampling of parts or having inserted the average unit weight for the parts.
Select the piece counting program as described in paragraph 10. The following screen will be
shown on the display:
1. Select the number of parts to put on the weighing pan as a sample, pressing in sequence
the MENU button to increase and the CAL button to decrease.
2. Load an empty container (if required), then press the PRINT button to confirm.
The choice of the number of parts (10, 25, 50, 100, manual, see chapter 10.3) is a function
of the weight of an individual part. Load the empty container.
3. Load the number of parts indicated on the display on the weighing pan and press the
PRINT button.
©Adam Equipment Co. Ltd. 2018
36