Manual Tare Function - Adam Equipment Solis SAB Série Mode D'emploi

9.1

MANUAL TARE FUNCTION

This function allows a tare value to be entered manually.
1. Press and hold the O/T button with the weighing pan empty, until the beeping stops,
and then release the button.
2. The following digits will be shown on the display:
3. Now insert the desired tare value using the CAL and MENU buttons to increase or
decrease the number, while pressing the O/T button to pass to the next number. During
the entering phase, holding down the O/T button allows you to delete the inserted value.
4. After having entered the desired value, press the PRINT button to confirm it. The value
will remain in memory until the TARE button is pressed, or when the balance is
disconnected from the power supply.
©Adam Equipment Co. Ltd. 2018
18