Adam Equipment Solis SAB Série Mode D'emploi page 48

3. Press the tare, if necessary, and load the first ingredient.
4. Then press the PRINT button to confirm.
5. Press the tare, if necessary, and load the second ingredient.
6. Then press the PRINT button to confirm.
7. Repeat the operation for a maximum number of 99 ingredients.
Note: During the acquisition of the ingredient, the display of Err10 indicates a negative
weight value. Check not to have made a mistake with the ingredient loading and zeroing
procedure.
8. To end, print the value of the individual components and the total value, and press and keep
pressed the PRINT button until the beeping stops. The display will show the following
screen:
9. To exit from the screen and carry out a new formulation, press the ON/OFF button once.
To exit from the program and return to the weighing screen, press the ON/OFF button two
consecutive times.
©Adam Equipment Co. Ltd. 2018
46