10.8
BACKLIGHT SETTINGS
The balance's display is equipped with a backlight to make the indication visible even in low
light conditions.
1. Select the backlight parameter as described in paragraph 10. The current set mode will be
shown on the display:
2. Select the desired backlight mode. By pressing the MENU or CAL button it will then be
possible to scroll through the various levels upward or downward; then confirm the choice
with the PRINT button.
BACKLIGHT MENU
Auto
On
Off
3. After having selected the desired mode, the screen will display the balance parameters
menu again. It will now be possible to select another parameter or return to weighing mode
by pressing the ON/OFF button.
©Adam Equipment Co. Ltd. 2018
BACKLIGHT MODE
Backlight automatically active during the weighing
phases
Backlight always on
Backlight always off
26