Transmission Speed Selection; Auto Zero Function - Adam Equipment Solis SAB Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10.3

TRANSMISSION SPEED SELECTION

It is possible to select different data transmission speeds.
1. Select the baud rate parameter as described in paragraph 10.
The current transmission speed will be shown on the display:
2. Select the serial data transmission speed, the options are: 1200-2400-4800-9600 baud. By
pressing the MENU or CAL button you can scroll to the different transmission speeds
upward or downward; then confirm the choice with the PRINT button.
3. After selecting the desired transmission speed, the screen will return to the balance
parameter menu again. It will now be possible to select another parameter or return to
weighing mode by pressing the ON/OFF button.
10.4

AUTO ZERO FUNCTION

Auto zero is the correction from a possible deviation from zero.
Different auto zero correction values can be selected.
1. Select the auto zero parameter as described in chapter 10.
The auto zero parameter will be shown on the display:
2. Select the desired auto zero value. By pressing the MENU or CAL button it will then be
possible to scroll through the various levels upward or downward, and then confirm your
choice with the PRINT button.
©Adam Equipment Co. Ltd. 2018
22

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Solis spb série

Table des Matières