Automatic Mode With Reference Weight - Adam Equipment Solis SAB Série Mode D'emploi

11.5.1

Automatic mode with reference weight

1. Select the percentage weighing function as described in paragraph 10. The following screen
will be shown on the display:
2. Confirm automatic mode by pressing the PRINT button.
3. The tare will be carried out and you will be asked to load the reference weight on the weighing
pan.
4. Load the reference weight on the weighing pan and then press the PRINT button; the word
"Wait" will be shown. Once the weight is acquired, a screen with an indication of the weight
loaded, reference weight, and percentage weight will be shown.
5. Now remove the reference weight, load the sample and read the percentage weight.
6. Press the ON/OFF button to exit from the percentage weighing function.
NOTE: If the reference weight entered is less than 10 displayed digits, the word ERROR
07 will be shown.
©Adam Equipment Co. Ltd. 2018
54