5.2 UNIT
WEIGHT
This display will show the unit weight of a sample. This value is either input by the
user or computed by the scale. The unit of measurement is grams if grams if
kilograms is selected for the weighing unit, or pounds if pounds is selected.
5.3 COUNT
DISPLAY
This display will show the number of items on the scale or the value of the
accumulated count. See the next section on OPERATION.
5.4 OTHER
SYMBOLS
The
accurately determine the count.
When the unit weight is not large enough to determine an accurate count,
the
In both cases the scale continues to operate and the indications are to alert
the user for a potential problem.
If a preset count has been stored the
A low battery symbol will turn on if the battery should be recharged.
The Lo, OK, Hi symbols will be used when the preset count has been set.
The symbol "Mem" will be seen when the internal memory has a record of
previous weighings stored in it.
DISPLAY
symbol, when there is insufficient number of samples to
symbol will be on.
symbol will be on.
© Adam Equipment Company 2011