Internal Calibration, Solis Sab Xxx I Models - Adam Equipment Solis SAB Série Mode D'emploi

8.2

INTERNAL CALIBRATION, Solis SAB xxx I models

For models with internal calibration, the calibration process is carried out through an internal
automatic system:
1. Press the CAL button with the pan empty.
The display will show the message "CAL" and the balance's calibration will be carried out
automatically.
2. At the end of the calibration, the balance will return to normal weighing condition.
If the calibration is not completed due to vibrations or drafts, the Error message "CAL bUT"
will be displayed. Press the CAL button again, and if the problem persists, select external
calibration or contact the supplier.
To change the calibration mode in these models with internal calibration, see section 10.12.1
©Adam Equipment Co. Ltd. 2018

.
g

16