Burkert 8285 El. COND Mode D'emploi page 71

Setting diagnostics mes-
sages as favorite
Setting diagnostics messages as favorite
Menu selection: Parameter setting / System control / Function control matrix
Secondary displays (1)
Here, additional values are displayed in the
measuring mode according to the factory
setting. When the respective softkey (2) is
pressed, the process variables measured by
the modules plus date or time are displayed.
In addition, you can use the softkeys (2)
to control functions. To assign a function to a
softkey, select
Parameter setting/System control/
Function control matrix
• Function which can be controlled by
softkeys:
• Parameter set selection
• KI recorder Start/Stop
• Favorites
Favorites
Selected Diagnostics functions can be called
up directly from the measuring mode using a
softkey.
The table on the next page explains how to
select favorites.
1
2
Function control matrix (Administrator)
ParSet KI rec.
Input OK2
Left softkey
Right softkey
Profibus DO 2
Return
Example:
"Favorites" to be selected with
"Right softkey"
To select a softkey function:
Select desired function using arrow
keys, press "Connect" softkey
and confirm with enter.
Deselect function:
Press "Disconnect" softkey,
confirm with enter.
98.1 %Air
25.6 °C
Fav
–
–
Connect
71