Ok1, Ok2 Inputs: Specify Level - Burkert 8285 El. COND Mode D'emploi

OK1, OK2 inputs: Specify level

Parameter setting/Module BASE/Inputs OK1, OK2
Note: Function check active
Menu Display
Inputs OK1, OK2 (Administrator)
For OK2 usage see
"Function control matrix"
OK1 usage
OK2 usage
Return
Inputs OK1, OK2 (Administrator)
For OK2 usage see
"Function control matrix"
OK1 usage
Input OK1
Input OK2
Return
The BASE module provides 2 digital inputs
(OK1, OK2). The following functions
(depending on the parameter setting) can
be started via a control signal:
• OK1: "Off" or "Function check"
• OK2: Select: System control / Function
control matrix. ("Off", "Parameter set A/B",
"Start KI recorder")
The switching level for the control signal
must be specified:
(active 10...30 V or active < 2 V).
66
Setting the OK inputs
7.00 pH
19.2°C
Off
Function check
7.00 pH
OK1/OK2 switching level
Stromausgang parametrieren
19.2°C
• Parametrierung aufrufen
•
• Paßzahl eingeben
•
• Modul BASE wählen
•
Function check
• "Augangsstrom I1" auswählen
active 10 ... 30 V •
active < 2 V
•
OK
OK1 usage
Stromausgang parametrieren
• Parametrierung aufrufen
• Call up parameter setting
• Paßzahl eingeben
• Enter passcode
• Modul BASE wählen
• Select "Module BASE"
• "Augangsstrom I1" auswählen
• Select "Inputs OK1/OK2"
• Select "OK1 usage"
Call up parameter setting
Enter passcode
Select "Module BASE"
Select "Inputs OK1/OK2"
Specify active switching level
BASE module
OK1
OK1
OK2
OK2
OK
8285