Burkert 8285 El. COND Mode D'emploi page 74

Specifications
––––––––––––––––––––––
l
Concentration
determination
*
––––––––––––––––––––––
l
Sensor monitoring
––––––––––––––––––––––
l
Sensoface
––––––––––––––––––––––
l
Sensor standardization
Adm. cell constant
Calibration record
––––––––––––––––––––––
l
Output curves
*
––––––––––––––––––––––
l
USP function
74
–––––––––––––––––––––––––––––––––––––––––––––––––
l
for the substances:
HNO
3
HCl
H SO
****
2 4
NaOH
*****
NaCl
User-defined concentration chart (5x5 values)
–––––––––––––––––––––––––––––––––––––––––––––––––
l
Sensocheck;
*
Polarization and cable capacitance
–––––––––––––––––––––––––––––––––––––––––––––––––
l
provides information on the sensor condition
–––––––––––––––––––––––––––––––––––––––––––––––––
l
Operating modes
*
- Automatic calibration with KCl or NaCl solution
- Manual: Entry of conductivity
- Product calibration / adjustment to vessel
- Entry of cell constant with simultaneous
display of conductivity and temperature
0.0050 ... 199.99 cm
Recording of:
Cell constant, calibration method,
with date and time
–––––––––––––––––––––––––––––––––––––––––––––––––
l
Linear
Trilinear
Function (logarithmic)
As desired via chart
–––––––––––––––––––––––––––––––––––––––––––––––––
l
Water monitoring in the pharmaceutical industry (USP)
with possibility to enter a limit value (%)
Output via relay contact (K1 ... K3, BASE) possible
0 ... 28 % by wt
35 ... 96 % by wt
0 ... 18 % by wt
22 ... 39 % by wt
0 ... 30 % by wt
32 ... 84 % by wt
92 ... 99 % by wt
0 ... 14 % by wt
18 ... 50 % by wt
0 ... 26 % by wt
-1
-20 ... +50 °C
–20 ... +50 °C
-20 ... +50 °C
–20 ... +50 °C
–17.8 ... +110 °C
–17.8 ... +115.6 °C
–17.8 ... +115.6 °C
0 ... +100 °C
0 ... +100 °C
0 ... +60 °C
8285