Burkert 8285 El. COND Mode D'emploi page 87

Icon
Explanation of icons important for this module
The device is in measuring mode.
The device is in calibration mode. Function check is active.
The device is in maintenance mode. Function check is active.
The device is in parameter setting mode. Function check is active.
The device is in diagnostics mode.
Function check: The NAMUR "function check" contact is active (factory setting: Module
BASE, Contact K2, N/O contact). Current outputs as configured:
• Currently measured value: The currently measured value appears at the current output
• Last measured value: The last measured value is held at the current output
• Fix 22 mA: The output current is at 22 mA
Failure: The NAMUR "failure" contact is active (factory setting: Module BASE, Contact
K4, N/C contact). To view error message, call up: Diagnostics menu/Message list
Maintenance: The NAMUR "maintenance request" contact is active (factory setting:
Module BASE, Contact K2, N/O contact). To view error message, call up: Diagnostics
menu/Message list
Limit indication: Lower / upper range limit exceeded
Temperature detection by manual input
man
Calibration is performed
Calibration - Step 1 of product calibration has been executed.
The analyzer is waiting for the sample value.
Calibration:
TC
Temperature compensation for process medium is active (Linear/Ultrapure water/Chart)
In the plaintext display in front of a menu line:
Access to next menu level with enter
In the plaintext display in front of a menu line when it has been blocked by the
Administrator against access from the Operator level.
Designates the module slot (1, 2 or 3), allowing the clear assignment of measured-value/
parameter displays in the case of identical module types.
Indicates the active parameter set (The analyzer provides two parameter sets A and B.
Up to 5 sets can be added using additional functions and SmartMedia card.)
87