Burkert 8285 El. COND Mode D'emploi page 39

Activating parameter setting
Call up parameter setting
Menu Display
Menu selection
Return to meas
Parameter setting (Administrator)
System control
Module 8285 FRONT
Module 8285 BASE
Module 8285 pH/ORP
Module 8285 El. COND
Module 8285 pH/ORP
Return
Module 8285 pH/ORP (Administrator)
Input filter
Sensor data
Cal preset values
TC process medium
ORP/rH value
Delta function
Return
During parameter setting the analyzer is in function check
mode
.
Current outputs and relay contacts behave as configured (Module BASE).
7.00 pH
0.1 °C
Select: [enter]
Lingua
7.00 pH
0.2°C
7.00 pH
0.1 °C
Blocked
Parameter setting
Call up parameter setting
From the measuring mode:
Press menu key to select menu.
Select parameter setting using arrow
keys, confirm with enter.
Passcode as delivered: 1989
Select module,
confirm with enter.
(In the Figure, the "Module pH/ORP"
is selected, for example.)
Select parameter using arrow keys,
enter
confirm with .
39