Controlling Speed & Direction With The Tiller; Adjusting The Tilt/Extend Tiller - MINN KOTA Riptide Fortrex Manuel De L'utilisateur

ADJUSTING THE DEPTH OF THE MOTOR
Controlling Speed & Direction with the Tiller
These motors are equipped with a twist tiller with a telescoping
handle, which offers a choice of five forward and three reverse
speeds. The speed control may be operated in either direction,
forward or reverse. Turn the tiller handle counterclockwise from
(OFF) to increase reverse speed and clockwise from (OFF) to
increase forward speed. Thrust decreases as you approach (OFF)
from either direction.
WARNING
When the motor is not in use, always turn the Tiller handle
to "OFF". If the handle is set or accidentally engaged or
bummped and is not positioned to "OFF" the prop will turn on
unexpectedly. The prop may also turn on unexpectedly if the
control board or 5 position switch fails. Prevent injury from a
turning propeller and always know how to quickly disengage
the power or correct the Tiller to turn the prop off.
WARNING
The Riptide Fortrex is not intended to be a primary
propulsion motor. Heavy use of the motor can cause
elevated motor temperatures, which can be increased by
an excessively hot operating environment. Use care when
handling the control head to avoid burns or injuries from
excessive heat. In the event that the motor or speed control
would break, always be prepared to take manual control of
the boat.

Adjusting the Tilt/Extend Tiller

Your trolling motor features 7 usable handle tilt positions: 45°, 30°, and 15° up and down from the 0° (horizontal) position. To use the
down positions, you must first press the release button located on the left underside of the pivot handle.
Your trolling motor handle also features a unique stow position, that is useful for limiting the amount of space required for storage or
travel.
22 | minnkotamotors.com
Tiller
Reverse
WARNING
Be alert for unexpected boat movement when operating the
Riptide Fortrex. The boat may encounter sharp turns and jolts if
the steering is changed sharply or if broad changes in speed are
made while operating. Maintain balance and observe safe motor
operation.
Forward
©2018 Johnson Outdoors Marine Electronics, Inc.