Programming Keys On The Transmitter; Main Menu - Burkert 8025 Notice D'utilisation

4 CONFIGURATION

4.1 Programming keys on the transmitter

To scroll-up the menus
or increase a value
To scroll-down the menus or
select a digit to be modified

4.2 Main Menu

The following variables are displayed in the operation mode:
45,6 L/ m
16,45 m A
80529 L
6247 L.
Relay 1 status
Flow rate in the required engineering unit (see calibration menu).
4...20 mA output signal, proportional to the flow
according to the selected measuring range
Main totalizer in the required engineering unit (see calibration
menu). Reset in the calibration menu.
Daily totalizer in the same engineering unit as the main totalizer. A
point behind the unit differentiates it from the main totalizer. Reset
by simultaneously pressing the
E-32-
FLOW TRANSMITTER 8025
Validate chosen
parameter or menu
Relay 2 status
keys for 2 s.
0......9