Configuration - Burkert 8025 Notice D'utilisation

4 CONFIGURATION

FLOW TRANSMITTER 8025
The operation of the 8025 is classified according to three levels and is similar whatever the
transmitter version (compact, panel-mounted or wall-mounted).
Main Menu
This menu displays flow, output current, main totalizer and daily totalizer. The daily totalizer
can also be reset in this menu..
Calibration Menu
All the necessary settings, such as the language, engineering units, K-Factor, 4...20 mA
measuring range, pulse output, relay and filter are carried through in this menu.
Here, the main, as well as the daily totalizer are simultaneously reset.
Test Menu
A flow can be simulated in this menu, which allows to test a process in the "dry-run condi-
tion".
This menu also displays the sensor frequency and allows to change the basic settings (Off-
set, Span) of the device.
E-31-