Burkert 8025 Notice D'utilisation page 62

3 INSTALLATION
+
-
Power supply
(*)
Metallic devices
(valve, pump,...)
3.3.2 Electrical wiring of compact transmitter without relay, with cable
plug EN 175301-8033
Before wiring the device, please read § 3.3.1 carefully.
Assembly of the EN 175301-803 cable plug
[3]
[2]
[1]
[5]
Wiring EN 175301-803 cable plug
Plastic pipes
- Extract part [3] from part [2].
- Unscrew cable gland [5].
[4]
- Insert cable into part [2] via cable gland [5].
- Connect part [3] (see hereafter).
- Replace part [3].
- Tighten cable gland [5].
- Place gasket [4] between connector and fixed connector.
- Plug the connector onto the transmitter.
- Tighten screw [1], in order to perform good sealing and
electrical contact.
1
L+
(12-30 VDC)
3
L- (0 VDC)
E-14-
FLOW TRANSMITTER 8025
8025
Panel- or wall-
mounted version
8020
Pulse output "minus"
Pulse output "plus"
2