EN
•
Clean all accessories with warm water and mild detergent.
•
Make sure that all parts are dry before the device is reassembled and stored away.
•
Store the device and all accessory parts in a dry, clean place that is not accessible to
children and animals.
Troubleshooting
If the device does not work properly, fi rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the following steps, contact the cus-
tomer service department.
Do not attempt to repair an electrical device yourself!
Problem
The device does not
work.
The error message H:HH
appears on the display.
The bread does not rise.
40
Possible cause / solution
•
Is the mains plug inserted in the plug socket correctly?
•
Is the plug socket defective? Try another plug socket.
•
Check the fuse of the mains connection.
•
Has the baking tin been inserted correctly?
•
Is the lid closed correctly?
•
Has the START-PAUSE / STOPP button been pressed?
•
The device has overheated. Switch off the device and
pull the mains plug out of the plug socket. Remove the
baking tin containing the ingredients from the device
and then allow the device to cool down COMPLETELY
before it is used again.
•
The device is still too hot. In this case, remove the bak-
ing tin containing the foodstuffs from the device, pull
the mains plug out of the plug socket and allow the de-
vice to continue to cool.
•
Has fresh yeast been used? Dry yeast is easier to han-
dle and does not have to be mixed in fi rst.
•
Has a suffi cient amount of yeast been used? Check the
amount stated in the recipe and measure it out precisely.
•
Is the yeast too old? Check the best-before date.
•
Were the ingredients added to the baking tin in the cor-
rect order? The yeast should not come into contact with
the salt too early.
•
Has too much salt and too little sugar been used?
Check the fi gures in the recipe and weigh / measure
out the ingredients precisely.
•
Which fl our was used? Is the fl our suitable for baking
bread? Check the details on the pack and use a differ-
ent fl our if necessary.
•
Is the quality of the fl our used still acceptable? The char-
acteristics of the fl our can deteriorate due to incorrect
storage (moisture, temperature, stored for too long).