Yamaha VK10L Mode D'emploi page 30

1
1
COOLING SYSTEM
4. Remove:
• Coolant reservoir 1
Refer to "COOLANT RESERVOIR" in CHAP-
TER 6.
5. Place an open container under the coolant
hose.
6. Disconnect:
• Coolant hose 1
7. Drain the coolant.
NOTE:
Lift up the tail of the machine to drain the coolant.
WARNING
Coolant is poisonous. It is harmful or fatal if
swallowed.
• If coolant is swallowed, induce vomiting
immediately and get immediate medical atten-
tion.
• If coolant splashes in your eyes, thoroughly
wash them with water and consult a doctor.
• If coolant splashes on your skin or clothes,
quickly wash it away with soap and water.
8. Connect:
• Coolant hose
9. Install:
• Coolant reservoir
Refer to "COOLANT RESERVOIR" in CHAP-
TER 6.
10. Fill:
• Cooling system
Recommended coolant:
High quality silicate-free ethylene
glycol antifreeze containing corro-
sion inhibitors
Coolant mixing ratio (coolant:water):
3:2 (60%:40%)
Total amount:
4.7 L (4.14 Imp qt, 4.97 US qt)
CAUTION:
• Hard water or salt water is harmful to engine
parts. If soft water is not available, use boiled
or distilled water.
• Do not use water containing impurities or oil.
6
INSP
ADJ