Secondary Shaft And Drive Chain; Housing Installation - Yamaha VK10L Mode D'emploi

1
SECONDARY SHAFT

SECONDARY SHAFT AND DRIVE CHAIN

HOUSING INSTALLATION

1. Install:
Installation steps:
• Install the secondary shaft.
3
• Tighten the bolt.
5
a 6
• Install the drive chain housing 1.
• Tighten the bolts.
7
• Install the drive chain, drive sprocket and driven
2
• Install the drive chain housing cover 2.
È Properly install the rubber seal onto the drive chain
• Tighten the bolts 3.
4
• Tighten the bolts 4.
• Install the collar.
• Tighten the collar set screw 5.
• Install the brake disc.
• Adjust the brake disc clearance.
2. Measure:
74
• Secondary shaft
• Drive chain housing
Secondary shaft bolt:
30 Nm (3.0 m · kg, 22 ft · lb)
Drive chain housing bolt:
43 Nm (4.3 m · kg, 31 ft · lb)
sprocket.
housing, making sure that these are no gaps.
Drive chain housing cover:
43 Nm (4.3 m · kg, 31 ft · lb)
Drive chain housing cover bolt:
24 Nm (2.4 m · kg, 17 ft · lb)
Collar set screw:
6 Nm (0.6 m · kg, 4.3 ft · lb)
®
LOCTITE
• Brake disc clearance a
Out of the specification → Adjust.
Brake disc clearance:
0.2 ~ 0.7 mm (0.008 ~ 0.028 in)
POWR
TR