Table des Matières
Publicité
COOLING SYSTEM/SELF-DIAGNOSIS
1
3
4
Br/G
L
L/R
2
1
4
3
5
4
RADIATOR FAN MOTOR RELAY
1. Inspect:
Inspection steps:
• Disconnect the radiator fan motor relay from the
• Connect the pocket tester (Ω × 1) and battery
Positive battery terminal → Blue/Red 1
Negative battery terminal → Green/White 2
Positive tester probe → Brown/Green 3
Negative tester probe → Blue 4
• If radiator fan motor relay does not have conti-
G/W
SELF-DIAGNOSIS
2
This model features a self-diagnosing system for
1
following displays.
1 Fuel meter
2 Fuel level warning indicator
3 Self-diagnosis warning indicator
4 Warning light
5 DIAG code (odometer/tripmeter)
NOTE:
The oil level warning indicator 6 and the warning
light 4 come on when the engine oil level is low. If
the oil level warning indicator and the warning light
come on, place the snowmobile on a level surface
and allow it to idle for one minute. If the oil level
6
warning indicator and the warning light go off, the
engine oil level is sufficient, however it is getting
low. Add engine oil as soon as possible.
If the oil level warning indicator and the warning
light do not go off, check the engine oil level in the
oil tank, and add engine oil if necessary.
117
• Radiator fan motor relay 1
coupler.
(12 V) to the load control relay terminals as
shown.
nuity between the brown/green and blue termi-
nals, replace it.
–
+
ELEC
Publicité
Table des Matières
