Engine; Fuel Line Inspection; Cooling System - Yamaha VK10L Mode D'emploi

FUEL LINE INSPECTION/COOLING SYSTEM
1
2
a
1
1

ENGINE

FUEL LINE INSPECTION

1. Inspect:
• Fuel hoses 1
• Fuel delivery hoses 2
Cracks/damage → Replace.

COOLING SYSTEM

Coolant replacement
NOTE:
The coolant should be changed at least every sea-
son.
1. Place the machine on a level surface.
2. Make sure that the carburetor coolant shut-off
lever 1 is turned to "ON" a.
3. Remove:
• Coolant filler cap 1
WARNING
Do not remove the coolant filler cap 1 when the
engine is hot. Pressurized scalding hot fluid
and steam may be blown out, which could
cause serious injury. When the engine has
cooled, place a thick rag or a towel over the
coolant filler cap. Slowly turn the cap counter-
clockwise until it stop. This allows any residual
pressure to escape. When the hissing sound
has stopped, press down on the cap while turn-
ing it counterclockwise to remove it.
5
INSP
ADJ