Table des Matières
Publicité
SLIDE RAIL SUSPENSION
INSPECTION
1. Inspect:
• Suspension wheel
• Guide wheel
Cracks/damage → Replace.
• Wheel bearing
Wheel turns roughly → Replace.
2. Inspect:
• Stopper band 1
Frayed/damage → Replace.
• Pull rod 2
Bends/damage → Replace.
• Shock absorber 3
Oil leaks/damage → Replace.
• Bushings
Wear/cracks/damage → Replace.
• Front pivot arm 4
• Rear pivot arm 5
• Rear pivot arm bracket 6
• Suspension wheel bracket 7
• Sliding frame 8
Cracks/damage → Replace.
• Slide runner 9
Wear/damage → Replace.
3. Install:
• Stopper band 1
NOTE:
Install the stopper band with a toward the hook
and b toward the front suspension bracket.
Stopper band nut:
4 Nm (0.4 m · kg, 2.9 ft · lb)
INSTALLATION
1. Adjust:
• Track tension
Refer to "TRACK TENSION ADJUSTMENT"
in CHAPTER 2.
85
POWR
TR
Publicité
Table des Matières
