A.2.3 Connection Terminals; A.2.4 Side Connectors - AOIP CALYS 50 Mode D'emploi

A.2.3 Connection terminals
Four terminals for connection for the "measurement" function (IN); two of which are reserved for 3 or 4 wire connection
when measuring resistance, temperature with a resistive probe and current for a passive transmitter. Refer to paragraph
A.1.
Four connection terminals for the "transmit/simulate" function (OUT). Refer to paragraph D.2.
The 8 terminals of the CALYS 50 / 75 / 100 are of the "push & lock" type. They accept 4 mm banana plugs, bare wires,
spade terminals and miniature connectors for thermocouples.
A.2.4 Side connectors
There are two connectors on the left hand side of the unit.
The first is a mains unit connector for battery charging.
The second is a type B USB socket for connection to a computer.
The connector for the pressure sensor is located on the right-hand side of the unit (function only available for models
CALYS 75 and CALYS 100).
USB
Socket
Material
Charger
Socket
Pressure sensor
socket
NTA47227-300A8
A
91 / 164