AOIP CALYS 50 Mode D'emploi page 146

CALYS 50 / 75 / 100
ADVANCED OPERATION
If high-level or low-level trigger is selected, the trigger level and number of data points to be stored after this trigger must
be defined.
Block size (2,500 measurements)
Post trigger = 1000 measurement
Trigger on programmed value = 3 V
Burst display:
The burst can be displayed as a table of values or a trend curve.
At this level, markers can be set (F1 and F2 function keys) and all values falling between these 2 markers can be
displayed in graphical form.
To display all the values in memory, press the function button, F1 (Global).
146 / 164 NTA47227-300A8