B.3 Generation / Simulation - AOIP CALYS 50 Mode D'emploi

B.3 Generation / Simulation

The transmission/simulation functions are selected by pressing the function button, F2 (OUT). Pressing this button
activates the transmission/simulation window: the lower window in the display is then marked by a rectangular border.
The F2 key will
change the OUT
mode to IN mode.
To select a Simulation function, press the F1 (configuration) key.
Select the Function ... menu using the navigation keys and confirm with the ENTER key. A TRANSMISSION
CONFIGURATION dialogue box is displayed.
The connections in the Transmission mode are made to the four "OUT" terminals located on the right half of the unit:
Generation / Simulation
NTA47227-300A8
B
119 / 164