C.7 Configurations - AOIP CALYS 50 Mode D'emploi

CALYS 50 / 75 / 100

C.7 Configurations

A configuration is the state of the CALYS 50 / 75 / 100 at a given moment. The state of the unit includes:
The current functions and ranges for measurement and simulation,
The parameters of all the transmission modes (staircase, ramp, synthesizer, etc.),
The scale corrections applied,
All the preferences defined in paragraph C.8.3.
To save the state of the unit, use the Configuration
Use the navigation keys to select a configuration. Edit the name of the configuration to be saved with the
alphanumeric keys and confirm with ENTER.
To recall a configuration from memory, use the Configuration
Use the navigation keys to select a configuration. Confirm with ENTER.
When loading a saved configuration, the CALYS 50 / 75 / 100 enters the manual Edit mode in transmission.
To erase the configurations of the CALYS 50 / 75 / 100, refer to paragraph A.6.2 to enter the Maintenance mode.
Use the Init EEP function key to reset the configurations of the unit to zero.
148 / 164 NTA47227-300A8
ADVANCED OPERATION
File Record under... menus.
File Open... menus.