Toring The Current Acquisitions - AOIP CALYS 50 Mode D'emploi

C.6 Storing the current acquisitions
CAUTION: Function only available for models CALYS 75 and CALYS 100.
The CALYS 50 / 75 / 100 is capable of storing 10,000 values in one or more acquisition bursts.
If necessary, use the F2 button to open the 'IN' window and display the Measurement menu bar.
Open the Configuration menu by pressing F1.
Select the Menu function then Memory.
Press ENTER.
Two new functions, Memory and MREC1, then appear in the bottom bar (replacing the functions Rest stat. And Hold). The
left and right arrow buttons can be used to switch from one mode to the other.
Pressing the function button, F4 (MREC1), stores the current acquisition.
Pressing F3 (Memory) gives access to all the memory functions.
RUN:
Starts the storage of data as configured using the Parameters function. The icon is shown in the Measurements window.
STOP:
Stops the current storage operation.
PARAMETERS
This can be used to define:
The burst size (10,000 values max.),
The sampling period, from 0.5 sec. to 30 min,
And the type of trigger (none, low level, high level).
Storing the current acquisitions
NTA47227-300A8
C
145 / 164