D.2.5 Temperature By Resistive Probes (Calys 50 / 75) - AOIP CALYS 50 Mode D'emploi

D.2.5 Temperature by resistive probes (CALYS 50 / 75)
Sensor Range of measurement
- 220°C + 1,200°C
Pt 50(α = 3851)
- 220°C + 1,200°C
Pt 100 (α = 3851)
- 200°C + 510°C
JPt 100 (α = 3916)
- 210°C + 850°C
Pt 100 (α = 3926)
- 220°C + 600°C
Pt 200 (α = 3851)
- 220°C + 1,200°C
Pt 500 (α = 3851)
Pt 1 000 (α = 3851) - 220°C + 1,200°C
- 60°C + 180°C
Ni 100 (α = 618)
- 40°C + 205°C
Ni 120 (α = 672)
- 60°C + 180°C
Ni 1 000 (α = 618)
- 70°C + 150°C
Cu 10 (α = 427)
- 50°C + 150°C
Cu 50 (α = 428)
For negative temperatures, use the value displayed R and not its absolute value.
Temperature coefficient: < 10 % of the accuracy/°C from -10°C to +18°C and from +28°C to +50 °C.
The above accuracy is given for 4 wire connection of the temperature sensor.
Taking into account, also, the intrinsic error of the temperature sensor used and its conditions of use.
Measurement current: from 0.1 mA to 1 mA
Settling time: < 1 ms
Settling time: < 5 ms
Pt 50 Ohms, 100 Ohms, 200 Ohms, 500 Ohms, 1 000 Ohms with α = 3851 in accordance with publication IEC
751/1995
Pt 100 Ohms with α = 3916 in accordance with publication JIS C 1604/1989
Pt 100 Ohms with α = 3926 in accordance with publication EIT90
Ni 100 Ohms, 1 000 Ohms with α =618 in accordance with publication DIN 43760
Ni 120 Ohms with α =672 in accordance with publication MIL-T-24388C
Cu 10 Ohms with α =427 in accordance with publication MINCO 16/9
Transmission / Simulation Function
Resolution Accuracy/1 year
0.03°C 0.014% R + 0.18°C
0.02°C 0.014% R + 0.12°C
0.02°C 0.014% R + 0.12°C
0.02°C 0.014% R + 0.12°C
0.10°C 0.014% R + 0.33°C
0.03°C 0.014% R + 0.18°C
0.02°C 0.014% R + 0.08°C
0.01°C 0.014% R + 0.08°C
0.01°C 0.014% R + 0.08°C
0.01°C 0.014% R + 0.08°C
0.01°C 0.014% R + 0.10°C
0.03°C 0.014% R + 0.15°C
D
NTA47227-300A8 159 / 164