C.1.8 Transmitter Mode - AOIP CALYS 50 Mode D'emploi

CALYS 50 / 75 / 100
Use the function keys:
To cancel a point
To add a point
To edit a point
Use the and keys to transmit points according to the parameters defined.
During generation, a progress bar indicates the state of progress. The function keys are used to control generation:
The key stops generation at any time
The key suspends generation
The key commences or resumes generation
An icon in the transmission window indicates suspended generation.
It is possible to transmit points manually one by one using the navigation keys. Use the Up and Down keys to select a
point. ENTER transmits the selected point and Left/Right select and transmit the previous/next point in the list
immediately.
C.1.8 Transmitter mode
This mode is used to transmit a value identical to the measured value.
136 / 164 NTA47227-300A8
ADVANCED OPERATION