Etting Parameters; C.8.1 Adjustment Of Contrast; Date And Time - AOIP CALYS 50 Mode D'emploi

C.8 Setting parameters
The parameters of the CALYS 50 / 75 / 100 can be set using the Configuration
The Contrast... sub menu is used to adjust the contrast of the display.
The Date/Time... sub menu is used to set the date and time of the unit.
The Preferences... sub menu is used to set the generic parameters which apply to all the functions performed by the
CALYS 50 / 75 / 100.
C.8.1 Adjustment of contrast
Use the Right and Left navigation keys to adjust the contrast of the display. The CALYS 50 / 75 / 100 saves the setting
made in its non-volatile memory and uses it each time the unit is switched on.
C.8.2

Date and Time

To set the date and time, use the Configuration Setup. Date/Time... menus.
Configurations
Setup menus.
NTA47227-300A8
C
149 / 164