B.2.10 Pressure Measurement - AOIP CALYS 50 Mode D'emploi

B.2.10 Pressure measurement

CAUTION: Function only available for models CALYS 75 and CALYS 100.
Open the MEASUREMENT CONFIGURATION dialog box,
Select the Pressure measurement function.
Select the unit (BAR, PSI, Pa, Atm, Kgcm2, cmHg, mmHg, inHgftH2O, inH2O).
Press ENTER.
Connect the pressure sensor on the right-hand side of the unit (see chapter, side connectors). If this is not connected or is
defective, an error message will be displayed.
B
Measurement
NTA47227-300A8 117 / 164