AOIP CALYS 50 Mode D'emploi page 147

The left and right arrow buttons can be pressed to move the cursor and read off the abscissa and ordinate values.
At this level, the markers can be redefined in order to zoom in between these two new points:
in the X field, enter a low value for the marker (X1), press ENTER and then press the function button, F2 (X 1),
In the X field, enter a high value for the marker (X2), press ENTER and then press the function button, F3 (X 2).
Burst save:
Stores the current burst.
Burst open:
Allows a burst to be selected for opening in order to view the data. At this level, a burst can be renamed or one or more
bursts can be deleted.
New burst:
Starts a new burst. If a burst is running, the user will be asked if this should be saved.
Burst management:
Can be used to view all bursts in memory. At this level, a burst can be renamed or one or more bursts can be deleted.
Statistics:
Shows the number of bursts in memory, the number of free bytes and the number of measurements that can be saved.
Storing the current acquisitions
NTA47227-300A8
C
147 / 164