Calibration Procedure; C.4 Calibrated Sensors - AOIP CALYS 50 Mode D'emploi

C.4 Calibrated sensors

The unit's calibrated sensors function makes it possible to use sensors of which the calibration (correction) factors can be
taken into account by the unit at the time of measurement.
Open the MEASUREMENT CONFIGURATION dialog box,
Select the Calibrated Sensors function.
Press ENTER.
Use the Up / Down
Press ENTER.
Fill in the information fields for the sensor. To move from field to field, use the function button, F1 (
arrow buttons to adjust the parameters or select a new line to define a new sensor.

Calibration procedure

NTA47227-300A8
C
).
139 / 164