B.2.3 Measuring Resistance - AOIP CALYS 50 Mode D'emploi

B.2.3 Measuring resistance
Display the MEASUREMENT CONFIGURATION dialogue box:
Select the Idc measurement function then the correct measurement range using the function and navigation
keys.
Confirm with ENTER.
The following ranges are available:
Range 400 Ohms
Resolution 1 mOhms
Measurement current 0.25 mA
To carry out a correct resistance measurement with 3 wires, the 3 conductors used must be:
of the same length,
of the same diameter,
of the same type of metal.
The CALYS 50 / 75 / 100 displays an icon showing the connections used (
wire) to make the measurement. The wiring arrangement is automatically detected by the calibrator.
4000 Ohms Auto
10 mOhms --
0.25 mA 0.25 mA
Measurement
for 2 wire, for 3 wire or
NTA47227-300A8
B
4
111 / 164