CALYS 50 / 75 / 100
D.2.6
Frequency (CALYS 50 / 75 / 100)
Range
Resolution
1000 Hz
0.01 Hz
10 kHz
0.1 Hz
(1) Note that the captured value may differ from the displayed value. The frequency generated is derived from a fixed
frequency by dividing it by a whole number. The displayed value (within the resolution of the display) is, therefore, this
value recalculated with the fastest approximation to the captured value.
The frequency actually generated is the displayed value to within the uncertainty specified in this table.
Temperature coefficient: < 5 ppm R/°C from -10°C to +18°C and from +28°C to +50 °C.
D.2.7
DC Voltage (CALYS 100)
Range
Resolution
100 mV
1 µV
2 V
10 µV
20 V
100 µV
50 V
1 mV
Temperature coefficient: < (7 ppm R + 0.5 ppm Range)/°C from -10°C to +18°C and from +28°C to +50 °C.
Settling time: < 5 ms
D.2.8
DC Current (CALYS 100)
Range
Resolution
24 mA
1 µA
4-20 mA
1 µA
0-20 mA
1 µA
Temperature coefficient < (10 ppm R + 0.5 ppm Range)/°C from -10°C to +18°C and from +28°C to +50 °C.
Settling time: < 5 ms
The above specifications are given for the following configurations:-
- CALYS 50 / 75 / 100 active mode (+24 V ON)
- CALYS 50 / 75 / 100 passive mode (+24 V OFF)
D.2.9
D.2.9
Resistance (CALYS 100)
Range
Resolution
40 Ω
1 mΩ
400 Ω
10 mΩ
4000 Ω
100 mΩ
Temperature coefficient: < (5 ppm R + 0.5 ppm Range)/°C from -10°C to +18°C and from +28°C to +50 °C.
Settling time: < 1 ms
Accuracy applies to a 4-wire connection with Y-shaped lugs; add 20 mOhms of uncertainty when banana plugs are used.
160 / 164
NTA47227-300A8
Accuracy / 1 year
Notes
0.005% R + 5 mHz
(1)
0.005% R + 5 mHz
(1)
Accuracy / 1 year
Notes
0.010% R + 3 µV
Output load min = 1 KΩ
0.010% R + 20 µV
Output load min = 2 KΩ
0.012% R + 200 µV
Output load min = 4 KΩ
0,012% R + 2 mV
Output load min = 4 KΩ
Accuracy / 1 year
Notes
0.012% R + 2 µA
(1)
0.012% R + 2 µA
(1)
0.012% R + 2 µA
Active mode +24V ON
Passive mode +24V OFF
Passive mode tester (+24 V OFF).
Active mode tester (+24 V ON)
Accuracy/1 year
Notes
0,012% R + 3 mΩ
(1) Iext =10 mA
0,012% R + 10 mΩ
(2) Iext =1 mA
0,012% R + 20 mΩ
(1) Iext from 1 to 10 mA
0,012% R + 30 mΩ
(2) Iext from 0.1 to 1 mA
0,012% R + 300 mΩ
Iext from 0.1 to 1 mA
TECHNICAL SPECIFICATIONS