C.3 Differential Measurements - AOIP CALYS 50 Mode D'emploi

CALYS 50 / 75 / 100

C.3 Differential Measurements

The relative measurement function of the unit is used:
to program a reference value other than that of the unit (ZERO function),
to cancel by measurement or programming a constant or interfering value (TARE function).
When one of the relative measurement functions is active, the
window.
The ZERO Define... menu is used to program the Tare value (positive or negative). This value is subtracted from the
measurements:
Value Displayed = Value measured – Tare Value
138 / 164 NTA47227-300A8
ADVANCED OPERATION
symbol is displayed on the screen in the measurement